As Pakistan builds up its research infrastructure, getting lab bench installation right matters more than ever for schools and industry labs across the country. Whether you’re outfitting a pharma plant in Karachi or setting up a new research wing at a university in Lahore, you need to follow a solid installation plan. That’s what keeps labs safe and functional over the long haul.

Start with a pre-installation check. Before the benches even show up, make sure the site’s ready. The floor has to handle the weight—concrete floors with good leveling work best. Check the ceiling height, especially if you’ll have fume hoods or overhead service racks. And don’t forget the basics: Pakistani labs run on 220V/50Hz power, so plan your electrical setup accordingly.

Leveling is a big deal. If a bench isn’t perfectly flat, you’ll end up with bad data and possible safety issues. Use proper leveling tools to get things just right. If you’re in northern Pakistan where earthquakes happen, add extra anchors to hold everything steady.

Utility hookups come next. Lab benches need water, power, and sometimes gas. Work with certified electricians and plumbers who understand lab standards. Every bench section should have its own water shutoff. Electrical lines need proper earthing and circuit protection—stick to NEPRA guidelines here.

When it’s time to put everything together, stick to this order: set up your base cabinets and frames first, then install the worktops, hook up utilities, and finally add accessories and storage. This step-by-step approach keeps mistakes to a minimum and helps you finish on time.

Once the benches are in, test all the utility connections. Make sure everything’s solid and that bench heights are comfortable for the people who’ll use them. Take photos and keep records—that way, you’re covered for warranties and future repairs.